Logo

Atto680 NT Labeling Kit

Structural formula of Atto680 NT Labeling Kit (IR-red fluorescent DNA labeling by nick translation)
Structural formula of Atto680 NT Labeling Kit
PP-305S-680

IR-red fluorescent DNA labeling by nick translation

175,80 €
excitation and emission spectrum of ATTO 680
excitation and emission spectrum of ATTO 680

For research use only.

Description:
Atto680 Nick Translation Labeling Kit contains all reagents (except template and materials for purification of the probe) required for nick translation labeling providing a highly efficient, easy-to-perform and rapid labeling technology.
The kit is recommended for direct enzymatic labeling of DNA. The Atto680 NT labeling mix contains specially optimized Atto680-dUTP for incorporation into DNA by nick translation using DNA Polymerase I. The excellent stability and quantum yield of the fluorophore combined with a high incorporation rate of the dye-dUTP complex makes it the ideal choice for a broad range of fluorescence applications.
Nick translation labeling is based on the reverse activities of Polymerase I and DNase I. DNase I is able to introduce randomly distributed nicks to double stranded DNA at low enzyme concentrations. The 5'→3' exonuclease activitiy of Polymerase I removes nucleotides from the 3' side of the nick while synthesizing a partial new complementary strand using the 3'-OH termini as primer. In presence of dye-labeled dUTP Polymerase I incorporates labeled dUTP instead of dTTP. The well balanced polymerase / nuclease activities of the enzyme mix ensure the generation of highly labeled double stranded DNA fragments.
The resultant DNA is suited for application in FISH, microarray gene expression profiling and other nucleic acid hybridization assays.
Protect fluorescent labeled dUTP from light and carry out experimental procedures in low light conditions.

Shipping: shipped on gel packs

Storage Conditions: store at -20 °C
avoid freeze/thaw cycles, store dark

Shelf Life: 12 months

Color: blue

Spectroscopic Properties: λexc 681 nm, λem 698 nm, ε 125.0 L mmol-1 cm-1 (Tris-HCl pH 7.5)

Content:
Enzyme mix (red cap)
2 units/μl polymerase I, 0.02 units/μl Dnase I in storage buffer

NT labeling buffer (green cap)
10x conc.

Atto680 NT labeling mix (purple cap)
0.5 mM dATP, 0.5 mM dCTP, 0.5 mM dGTP, 0.25 mM dTTP,
0.25 mM Atto680-dUTP, pH 7.5

Stop buffer (yellow cap)
0.5 M EDTA, pH 8.0

PCR-grade water (white cap)

Recommended NT assay:
Sample Material can be supercoiled or linearized plasmid DNA, cosmid or BAC DNA, whole or partial chromosomes or purified PCR products.
Prepare the following reaction mixture in a sterile vial.
20 μl Nick translation labeling assay

fill up to 20 μlPCR-grade waterwhite cap
2 μl10x NT labeling buffergreen cap
2 μlAtto680 NT
labeling mix
purple cap
1-1.5 μgtemplate DNA-
2 μlEnzyme mixred cap

  • Vortex the mix gently to assure homogeneity and centrifuge briefly to collect the reaction mixture at the bottom of the tube.
  • Place the tube in a precooled thermomixer at 15 °C. An incubation of 90 min is recommended to generate DNA fragments in a size range between 200 and 500 bp.
  • To control the length of the fragments load 2 μl of the assay on an agarose gel. Place the reaction tube at -20 °C while running the gel.
  • To get smaller fragments add additional 2 μl of the Enzyme mix and extend the incubation at 15 °C.
  • For final stopping the reaction add 5 μl of Stop buffer (yellow cap). Proceed to purification or store at -20 °C.


Purification of the probe:
To remove unincorporated nucleotides from the reaction mixture prior to its use in subsequent experiments one of the following procedures is recommended:
1. Purification by silica-gel membrane adsorption - PCR Purification Kit, Cat.-No. PP-201
The Jena Bioscience PCR Purification Kit provides a simple and efficient way to purify DNA fragments larger than 100 bp. The preparation is based on a silica-membrane technology for binding DNA in high-salt and elution in low-salt buffer. Please refer to the instruction manual.
2. Purification by Isopropanol precipitation
Add 1 μl glycogene (2 mg/ml), 2 μl sodium acetate (3 M) and 14 μl isopropanol to the reaction mixture and mix well but gently. Incubate on RT for 15 min and spin down at maximum speed at 4 °C for 30 min. Discard the supernatant and wash 2x with 70 % ethanol (spin down at maximum speed for 5 min).
3. Purification by Centrifugal Filter Units
Unincorporated nucleotides can be removed by centrifugation using centrifugal filter units. Select the filter unit by its cut-off for DNA fragments and follow the manufacturer's instructions.

Incorporation rate of the fluorophore:
The efficiency of DNA labeling can be estimated by calculating the ratio of incorporated fluorophores to the number of bases in the fragment (dye / base).
1. Measurement of the optical density: Measure the absorbance of the labeled DNA fragment at 260 nm (A260) and at the excitation maximum (λexc) for the dye (Adye).
2. Correction of the A260 reading: To obtain an accurate absorbance measurement for the nucleic acid, the contribution of the dye at 260 nm has to be corrected. Use the following equation:
Abase = A260 - (Adye x CF260)
Correction Factor for Atto680: CF260 = 0.25
3. Calculation of the labeling rate: The dye to base ratio is given by:
dye / base = (Adye x εbase) / (Abase x εdye)
Extinction coefficients:
Atto680: εdye = 125,000 cm-1 M-1
dsDNA: εbase = 6,600 cm-1 M-1
ssDNA: εbase = 8,900 cm-1 M-1
oligonucleotide: εbase = 10,000 cm-1 M-1
Example: A dye to base ratio of 0.05 corresponds to an incorporation of 10 dye-dUTP nucleotides into a DNA fragment containing 200 nucleotides or, respectively, into a 100 bp PCR fragment. If an equal distribution of dATP, dCTP, dGTP and dTTP in the DNA fragment can be assumed, 10 of the 50 existing dTTPs have been substituted by dye-dUTP resulting in a labeling rate of 20 %.

Related products: Aminoallyl-dUTP-ATTO-680, #NU-803-680

Cat. No. Amount Price  
PP-305S-680 10 reactions175,80 €
PP-305L-680 50 reactions557,70 €

At this point, external content from bioz.com is embedded. When it loads, data (e.g. your IP address) is transmitted to the provider.

Scientific citations for Jena Bioscience pp-305-680

5 scientific citations and 4 citation images found by Bioz.

  1. Non-Canonical Roles and Variants of Core Translation Initiation Factors

    Pulos-Holmes, Mia Christina

    , 2020-01-01 · DOI:

    .. buffer.IRP1 was eluted using 800 mM KCl in IEX buffer.. IRP1 electrophoresis mobility shift assays To detect IRP1 binding by native gel shifts, RNA samples were transcribed using the Atto-680 RNA Labeling Kit (Jena Bioscience, FP-220–680) and subsequently purified using RNA Clean and Concentrator-25 columns (Zymo, R1018).. This form of labeling has been shown not to disrupt ..

    Bioz Rating: 90/100

  2. Repression of ferritin light chain translation by human eIF3

    Mia C Pulos-Holmes, Daniel N Srole, ..., James L Manley

    eLife, 2019-08-15 · PMID:31414986

    To detect IRP1 binding by native gel shifts, RNA samples were transcribed using the Atto-680 RNA Labeling Kit (Jena Bioscience, FP-220–680) and subsequently purified using RNA Clean and Concentrator-25 columns (Zymo, R1018).. This form of labeling has been shown not to disrupt protein-RNA interactions ( ).This ..

    Bioz Rating: 90/100

  3. Nuclease Activity of Legionella pneumophila Cas2 Promotes Intracellular Infection of Amoebal Host Cells

    Felizza F. Gunderson, Celeste A. Mallama, ..., Nicholas P. Cianciotto

    Infection and Immunity, 2015-03-01 · PMID:25547789

    In order to examine the effect of Cas2 on long ssRNA, pTRI-actin, encoding a 304-nucleotide (nt) portion of the mouse β-actin gene (MAXI script kit; Ambion, Austin, TX), and bacteriophage λ DNA, encoding a 523-nt portion of the phage genome (Jena Biosciences, Jena, Germany), were templates in in vitro transcription reactions using an Atto-680 RNA labeling kit (Jena Biosciences).

    Bioz Rating: 90/100

View all citations on Bioz
Powered by Bioz See more details on Bioz
Contact Dr. Barbara Zschoernig

Contact

Dr. Barbara Zschoernig

For inquiries regarding Nucleic Acid, Click Chemistry, Probes & Epigenetics and RNA Technologies