» Sign in

qPCR ProbesMaster Lyophilisate

Lyophilized real-time PCR Master Mix for dual labeled probes

Product Cat. No. Amount Price (EUR) Buy / Note
preloaded 8-tube strips (optical clear caps / low profile) PCR-156S-8TL 12 strips (96 reactions) 120,00 Add to Basket/Quote Add to Notepad
preloaded 8-tube strips (optical clear caps / low profile) PCR-156L-8TL 60 strips (480 reactions) 480,00 Add to Basket/Quote Add to Notepad
preloaded 8-tube strips (optical clear caps / high profile) PCR-156S-8TS 12 strips (96 reactions) 120,00 Add to Basket/Quote Add to Notepad
preloaded 8-tube strips (optical clear caps / high profile) PCR-156L-8TS 60 strips (480 reactions) 480,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (flat top / without skirt) / low profile PCR-156S-FTL 2 plates (192 reactions) 180,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (flat top / without skirt) / low profile PCR-156L-FTL 10 plates (960 reactions) 720,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (flat top / without skirt) / high profile PCR-156S-FTP 2 plates (192 reactions) 180,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (flat top / without skirt) / high profile PCR-156L-FTP 10 plates (960 reactions) 720,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (half skirt) / low profile PCR-156S-HSL 2 plates (192 reactions) 180,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (half skirt) / low profile PCR-156L-HSL 10 plates (960 reactions) 720,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (half skirt) / high profile PCR-156S-HSP 2 plates (192 reactions) 180,00 Add to Basket/Quote Add to Notepad
preloaded 96-well plates (half skirt) / high profile PCR-156L-HSP 10 plates (960 reactions) 720,00 Add to Basket/Quote Add to Notepad

For in vitro use only!

Shipping: shipped at ambient temperature

Storage Conditions: store at ambient temperature
Store in an aluminium-coated bag or on a dry place.
Lyophilisates may hydrate at humidity levels >70 % when sealing is opened.

Shelf Life: 12 months

Description:
qPCR ProbesMaster Lyophilisate is designed for the quantitative real-time analysis of DNA samples using DNA probe based detection. The lyophilisate is recommended for use with Dual Labeled Fluorescent Probes, e.g. TaqMan®, Molecular Beacons or FRET probes. It provides an easy-to-handle and powerful tool for quantification of sample DNA in a broad dynamic range of up to 6 orders of magnitude with exceptional sensitivity and precision.
The high specificity and sensitivity of the qPCR lyophilisate is achieved by an optimized hot-start polymerase. Its activity is blocked at ambient temperature and switched on automatically at the onset of the initial denaturation. The thermal activation prevents the extension of nonspecifically annealed primers and primer-dimer formation at low temperatures during PCR setup.

Kit contents:
qPCR Master Lyophilisate
Preloaded lyophilisates of qPCR Pol, dATP, dCTP, dGTP, dTTP, Reaction Buffer, MgCl2 and stabilizers.

PCR grade water

Handling
qPCR Master Lyophilisate is delivered in PCR reaction tube strips or 96-well plates preloaded with a complete qPCR master mix in a dry, room temperature stable format. The lyophilisate combines highest performance with convenience of use and stability. There is no need for freezing, thawing or pipetting on ice. The few remaining pipetting steps minimize the risk of errors or contaminations.
Each vial contains all components (except primers, Dual Labeled Probes and template) required for a 20 μl real-time PCR assay.
To perform PCR, only fill up the vials with a primer/probe premix and add DNA template.

Applications:
The lyophilisate contains dUTP instead of dTTP allowing an UNG (Uracil-N-Glycosylase) treatment at the onset of thermal cycling to prevent carry-over contaminations of DNA from previous PCR reactions.
The reaction chemistry is optimized for block-based PCR instruments. The lyophilisate can also be used with ROX reference dye in PCR instruments that are compatible with the evaluation of the ROX signal. In this case, the ROX dye (#PCR-351) should be added as 1x concentration to the PCR reaction.

Dual-labeled DNA probes:
Real-time PCR technology based on dual-labeled DNA probes provides a high sensitive and high specific PCR system with multiplexing capability. It requires two standard PCR primers and the DNA probe that hybridizes to an internal part of the amplicon. The sequence of the dual-labeled DNA probe should avoid secondary structure and primer-dimer formation.

Preparation of the primer/probe mix
The preparation of a primer/probe premix is recommended in quantitative PCR reactions to reduce pipetting errors. Prepare 13 volumes of master mix for 12 samples or a triple-set of 4 samples as specified. Pipet with sterile filter tips and minimize the exposure of the labeled DNA probe to light. Perform the setup in an area separate from DNA preparation or analysis. No-template controls (NTC) should be included in all amplifications.

Recommended PCR assay:

Comp.stock conc.final conc.Volume for 1x 20 μl mixVolume for 13x 20 μl mix
forward Primer1)10 μM300 nM0.6 μl7.8 μl
reverse Primer1)10 μM300 nM0.6 μl7.8 μl
Dual-Labeled
DNA probe2)
10 μM200 nM0.4 μl5.2 μl
UNG3) (PCR-353)1 unit/μl0.1 unit/assay0.1 μl1.3 μl
PCR-grade waterFill up to 15 μlFill up to 195 μl

1) The optimal concentration of each primer may vary from 100 to 500 nM.
2) Optimal results may require a titration of DNA probe concentration between 50 and 800 nM.
3) Only required if an UNG (Uracil-N-Glycosylase) treatment to prevent carry-over contaminations of DNA should be applied. The lyophilisate does not contain UNG.

Dispensing the master mix
Vortex the primer/probe mix thoroughly to assure homogeneity. Dispense 15 μl to each PCR tube or well of the plate.

Addition of template DNA
Add 5 μl of template DNA (or no-template controls) to each reaction vessel and cap or seal the tube / plate. Do not exceed 200 ng DNA per reaction as final concentration. Tubes or plates should be centrifuged before cycling to remove possible bubbles.

Recommended cycling conditions:

UNG treatment4)50 °C2 min1x
Initial
denaturation and polymerase activation
95 °C2 min1x
Denaturation95 °C15 sec40-50x
Annealing and Elongation60-65 °C5)1 min6)40-50x

4) Cycling step 1 is only required if an UNG (Uracil-N-Glycosylase) treatment is applied.
5) The annealing temperature depends on the melting temperature of the primers and DNA probe used.
6) The elongation time depends on the length of the amplicon. A time of 1 min for a fragment of up to 500 bp is recommended.

For optimal specificity and amplification an individual optimization of the recommended parameters, especially of the annealing temperature may be necessary for each new combination of template, primer pair and DNA probe.