» Sign in / Register



Cat. No. Amount Price (EUR) Buy / Note
CLK-A108P-10 10 mg 166,50 Add to Basket/Quote Add to Notepad
CLK-A108P-100 100 mg 867,70 Add to Basket/Quote Add to Notepad
CLK-A108P-500 500 mg 2.628,70 Add to Basket/Quote Add to Notepad
Structural formula of DBCO-PEG4-Maleimide
Structural formula of DBCO-PEG4-Maleimide

For research use only!

Shipping: shipped at ambient temperature

Storage Conditions: store at -20 °C
store undissolved, for use prepare a fresh solution

Shelf Life: 12 months after date of delivery (undissolved)

Molecular Formula: C36H42N4O9

Molecular Weight: 674.75 g/mol

CAS#: 1480516-75-3

Purity: > 90 % (HPLC)

Form: oil

Color: slightly yellow

Solubility: DCM, DMF, DMSO, THF

Protein-peptide conjugates
Peptide-small molecule conjugates
18F radiolabelling
Protein-oligonucleotide conjugates
Surface modification

Sulfhydryl reactive reagent with enhanced solubility in water as well as in commonly used organic solvents of moderate polarity. The PEG4 hydrophilic spacer will reduce or eliminate aggregation or precipitation problems when labeling antibodies and other biological molecules. Due to its length, the 26.3 Å (22 atoms) long spacer enhances accessibility of the azide-reactive dibenzylcyclooctyne and of reactive thiols, which may be buried.

Important Product Information

  • Molecules, which shall react with maleimide compounds, must have free (reduced) sulfhydryls. Reduce peptide disulfide bonds with disulfide reducing reagents such as Immobilized TCEP Disulfide Reducing Gel (Pierce Biotechnology). Reduce disulfide bonds in high molecular weight proteins using 5 mM TCEP (1:100 dilution) for 30 minutes at room temperature, followed by TCEP removal using a desalting column. Proteins (e.g. antibodies) can be inactivated by complete reduction of their disulfide bonds. Selective reduction of hinge-region disulfide bonds in IgG can be accomplished with 2-Mercaptoethylamine-HCl (2-MEA). Sulfhydryls can be added to molecules using N-succinimidyl S-acetylthioacetate (SATA) or 2-iminothiolane-HCl (Traut's Reagent), which modify primary amines.
  • Do not use buffers that contain sulfhydryl-containing components (e.g. DTT).
  • Avoid buffers that contain azides, which can react with DBCO.
  • The maleimide group reacts predominantly with free sulfhydryls at pH 6.5 - 7.5, forming stable thioether bonds. At pH values > 7.5, reactivity toward primary amines and hydrolysis of the maleimide groups can occur. At pH 7, the maleimide group is ~1,000 times more reactive toward a free sulfhydryl than to an amine.
  • Do not use DTT, TCEP or β-mercaptoethanol, because they will reduce the azide.

Additional Materials Required:

  • Water-miscible organic solvent such as dimethyl sulfoxide (DMSO) or dimethyl formamide (DMF)
  • Reducing reagents such as Immobilized TCEP Disulfide Reducing Gel (Pierce Biotechnology)
  • Reaction buffer: Phosphate-buffered saline (PBS) or other sulfhydryl-free buffer at pH 6.5 - 7.5. Include 5 - 10 mM EDTA to help prevent the reoxidation of disulfides by trace divalent metals.
  • (Optional): Quenching buffer: concentrated (0.5 - 1 M) cycteine, DDT or other thiol containing reducing agents
  • (Optional): Spin Desalting Columns or Slide-A-Lyzer Dialysis Cassettes

Protein Derivatization

  • Prepare sulfhydryl-containing protein, prepared as described in the Important Product Information section.
  • Immediately before use, weigh a small quantity of DBCO-Maleimide and dissolve it in dimethylformamide (DMF) or dimethylsulfoxide (DMSO) at a 5 - 20 mM concentration.
  • Dissolve protein(s) in Conjugation Buffer at 0.1 mM (e.g. 5 mg in 1 ml for a 50 kDa protein).
  • Add DBCO-Maleimide solution to the dissolved protein(s) at 0.4 mM final concentration (ca. four-fold molar excess for 0.1 mM protein solution).
  • Note: The reaction solution may appear cloudy as a result of the low aqueous solubility of DBCO-Maleimide, usually, such solutions become clearer as the reaction proceeds. Many proteins will precipitate when the DMF or DMSO concentration exceeds 10 - 15 % of the final reaction volume, if protein solubility is not an issue, there is no limit to the DMF or DMSO concentration that may be used.
  • Incubate reaction mixture for 1 hour at room temperature or for 2 hours at 4 °C.
  • Quench reaction by adding Quenching Solution at 10 - 50 mM final and incubating for 15 minutes at room temperature. Alternatively (or in addition) remove the excess nonreacted reagent by desalting or dialysis.

Copper-free Click Reaction

  • Prepare the azide-containing sample in reaction buffer.
  • Add DBCO-protein conjugate to azide-containing sample.
  • Recommendation: Add 1 mole equivalent of limiting protein to 1.5 - 3.0 mol equivalents of highest abundance protein.
  • Incubate the reaction at room temperature for 2 - 4 hours. Incubation at 4 °C requires 4 - 12 hours.
  • The reaction is now ready for purification.

Long-term aqueous Stability of DBCO-labeled Samples

DBCO modified goat IgG (DOL 7) losses about 3 - 5 % of its reactivity toward azides over 4 weeks at 4 °C or -20 °C. For long time storage azide- and thiol-containing buffers should be avoided.

Direct Measurement of DBCO Incorporation

The degree of DBCO incorporation (i.e. the number of DBCO per protein molecule) can be determined from the absorbance scan of the purified conjugate (235 - 400 nm).


Problem: No conjugation of DBCO with azide

  • Possible reason: One or more sample is not labeled
    - Confirm molecules were labeled or repeat activation process
  • Possible reason: DBCO-Maleimide decomposed
    - Allow product to equilibrate to room temperature before opening
    - Prepare new solutions in the indicated dry solvents
    - Avoid buffers that contain sulfhydryl
  • Possible reason: Excess reagent not quenched or removed
    - Remove non-reacted reagent by dialysis or desalting

Problem: Low conjugation of DBCO and azide

  • Possible reason: Suboptimal reaction conditions
    - Increase incubation time
    - Optimize conjugation conditions by altering molar excess
    - Perform conjugation reactions at 37 °C

Product Citations:
Please click the black arrow on the right to expand the citation list. Click publication title for the full text.

Selected References:
Simon et al. (2012) Facile Double-Functionalization of Designed Ankyrin Repeat Proteins using Click and Thiol Chemistries. Bioconjugate Chem. 23 (2):279.
Zeng et al. (2012). 64Cu Core-Labeled Nanoparticles with High Specific Activity via Metal-Free Click Chemistry. ACS Nano. 6 (6):5209.
Arumugam et al. (2011). [18F]Azadibenzocyclooctyne ([18F]ADIBO): A biocompatible radioactive labeling synthon for peptides using catalyst free [3+2] cycloaddition. Bioorg. Med. Chem. Lett. 21:6987.
Campbell-Verduyn et al. (2011). Strain-Promoted Copper-Free Click Chemistry for 18F Radiolabeling of Bombesin. Angew. Chem. Int. Ed. 50:11117.
Debets et al. (2010) Aza-dibenzocyclooctynes for fast and efficient enzyme PEGylation via copper-free (3+2) cycloaddition. Chem. Commun. 46:97.